Telecom Behnke Hybrid Series Instructions Manual page 62

Instructions for Behnke Hybrid series 20-0005-BS, SIP intercoms series 20-0005B-IP
GB
Mounting
Fix modules in frame by means of counter
2
plate
Fasten modules openly in the frame by means
of a counter plate.
Behnke reverse side components
3
When mounting Behnke reverse side compo-
nents with on-site front panels, it is essential
to observe the corresponding sound inlet and
outlet dimensions as well as the required
mounting points. See also installation condi-
tions on page 57.
62
M 2.5 x 4 mm countersunk screws included in
the screw accessory pack.
Furthermore included in the screw accessory
pack: Allen key 2.5 mm 4 pcs. Allen screw M 4
x 20 mm for fastening the intercom station in
the Behnke surface-mounted housing, Behnke
in-wall housing or Behnke pedestals.
www.behnke-online.de