Towing Or Winching; After Use Each Day; Hour Meter - Upright SL26SL Service Manual

Towing or Winching

T
OWING OR
Perform the following only when the machine will not operate under its own power and it is necessary to
move the machine or when winching onto a transport vehicle (see "Transporting the Work Platform" on
page 13).
C A U T I O N
DO NOT tow or winch the machine faster than 0,3 m/s (1 ft./s). Faster speeds will damage drive
components and void the warranty.
B
R A K E
Perform the following only when the machine will not operate under it's own power and it is neces-
sary to move the machine or when towing the machine up a grade or onto a trailer to transport.
1. Close the needle valve by turning the allen screw clockwise.
2. Pump the Brake Release Pump until the Parking Brake Cylinder Rod clears the wheel rotor.
3. The machine will now roll when pushed or pulled.
4. Be sure to open needle valve and verify that the cylinder rod has extended before the machine
is operated.
Hand Pump
W A R N I N G
!
Never tow faster than 0,3 m/sec. (1 ft./sec.).
Never operate the work platform with the parking brakes released. Serious injury or damage could
result.
A
F T E R
1. Ensure that the platform is fully lowered.
2. Park the machine on a firm level surface, preferably under cover, secure against vandals, children and
unauthorized operation.
3. Turn the Chassis Key Switch to OFF and remove the key to prevent unauthorized operation.
H
O U R
To access the hour meter function perform the following steps.
1. Climb into the basket (with the machine powered up)
2. Push the platform emergency stop button.
3. Hold down the following buttons, Horn & Lift.
4. While holding the buttons twist the emergency stop button to return power to the machine.
5. "hr" will now be displayed on the readout, Pressing the right turn button will scroll through the accumu-
lated hours two digits at a time. For example, if pressing the right turn button once displays "20", pressing
it a 2nd time displays "58", and pressing it a 3rd time displays "hr", the elapsed time of operation is 2058
hours.
Page 12
W
INCHING
R
E L E A S E
U E
S E A C H
M
E T E R
Operation Manual
P
U M P
!
D
A Y
Needle Valve