Table of Contents
Advertisement
The lubrication instructions are in Figure 2. The motor has pre-lubricated bearings with a service
interval of ten years. The transmission and beater head gearing are packed with Nevastane 5P7 grease.
WARNING: NEVER WORK ON THE TRANSMISSION WITH THE MIXER RUNNING.
IT IS RECOMMENDED THAT THE ELECTRICAL SERVICE POWER CORD BE DISCON-
NECTED TO PREVENT ACCIDENTAL START UP.
Bevel Gear
Internal Gear
LUBRICATION
LUBRICATION INSTRUCTIONS
B
Bowl Lift
A
Bearing
B
C
FIGURE 2
B
Spur Gear
A
Bowl Lift
Slide
Page 2.3
Speed Control
Bearing
A
Oil yearly medium
(30 weight)
machine oil or
Molykote BR-2 Plus
B
Redistribute grease
as needed or when
maintenance is
performed on the
beater head assembly.
Grease yearly with
C
Molykote BR-2 plus
Advertisement
Table of Contents
