Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Univex MP-100
Summary of Contents for Univex MP-100
- Page 1 MP-100 OPERATORS MANUAL PERFECT PEELER Persons under the age of 18 years are not permitted to operate or have accessibility to operate this equipment per U.S. Department of Labor Employment Standards Administration Fact Sheet No. ESA91-3. ED 1 MP-100 12/09...
- Page 2 TO INSURE BOTH SAFE AND TROUBLE-FREE PERFORMANCE, WE STRESS THAT ALL PERSONNEL THAT WILL BE INVOLVED WITH YOUR NEW UNIVEX MP-100 MELON PEELER MUST READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE THIS UNIT....... WE APPRECIATE YOUR COOPERATION AND YOUR BUSINESS.
-
Page 3: Table Of Contents
PAGE FIGURE 1 OVERALL VIEW OF THE MP-100 MELON PEELER ....3 FIGURE 2 CRANK ASSEMBLY ......... . .4 FIGURE 3 CENTER HEAD ASSEMBLY . -
Page 4: Introduction
The MP-100 is equipped with two interchangeable peeling knives that will peel melons from 4 inch wide to 7 inch wide. The MP-100 is not limited to the length of any particular melon, but the width or diameter of the melon to be peeled must be between 4 and 7 inches. This size range spans melons from No. -
Page 5: Figure 1 Overall View Of The Mp-100 Melon Peeler
OVERALL VIEW OF MP-100 MELON PEELER FIGURE 1 FRUIT RELEASE LARGE GEAR CENTER HEAD SHAFT SUPPORT PIN SHAFT SUPPORT PILLOW BLOCK FOOT OPERATING HANDLE RELEASE PIN SMALL GEAR KNIFE ASSEMBLY KNIFE ASSEMBLY KNOB SIDE HEAD SIDE HEAD SUPPORT SUPPORT KNOB... -
Page 6: Assembly Instructions
ASSEMBLY INSTRUCTIONS Assemble the MP-100 Perfect Peeler in the following order: 1. Attach the support with the two side heads to the under side of the top plate with the two knobs. 2. Assemble the small gear and shaft through one spacer and the pillow block then the other spacer and into the handle assembly and secure it with the release pin. -
Page 7: Operator's Instructions
MP-100 closely matches the width of the opening to the MP-100 knife. You may find that a melon 5 1/2 inches wide by 6 inches long can be peeled by feeding the melon lengthwise over knife “A”, and equally as well by feeding the melon sideways over knife “B”. -
Page 8: Knife Selection
KNIFE SELECTION: Before processing, choose the correct knife for your melon size. The MP-100 comes with a small and a large knife as standard equipment and a double knife is available as an option. The side heads require adjustment corresponding to the knife selection. the side heads can be fastened in three positions. -
Page 9: Processing Product
MP-100. You will soon develop a rhythm in feeding the MP-100. When you arrive at your last melon half to be peeled, use the fruit release to push the melon through the knife. -
Page 10: Cleaning
CLEANING: A brush is supplied to aid in cleaning the MP-100 Perfect Peeler. The Perfect Peeler can be cleaned fully assembled, by immersing it in a sink and using the brush and a mild detergent to wash it. Once the Perfect Peeler has been thoroughly washed, rinse, sanitize and are dry the peeler. The Perfect Peeler can also be disassembled in the reverse of the assembly instructions and the subassemblies can be washed individually. -
Page 11: Warranty
Please call the Univex Warranty Service Department at 800-258-6358 to report warranty claims before arranging for repair of the unit. The unit must be delivered to a Univex authorized service agent or to the Univex facility for warranty repairs. The end user is responsible for all shipping or travel charges arising from the repair or servicing of this unit under warranty.