Removing The Combustion Chamber Lining - RAIS Q-Tee II USA User Manual

REMOVING THE COMBUSTION CHAMBER LINING

The combustion chamber lining protects the body of
the fireplace insert from the heat of the fire. The large
differences in temperature can lead to cracks in the
combustion chamber lining. This will not affect the
functionality of the fireplace insert. The lining will only
need be replaced after several years of use when it be-
gins to disintegrate. The liner panels are easy to place in
position in the fireplace insert and can easily be replaced
by you or your dealer.
Procedure for removing the combustion chamber lining:
Remove the smoke deflector plate (1) by pulling it forward
and tilting it so that it is free of the vertical plates. The
Q-Tee II
smoke deflector can now be carefully removed.
Demounting the vermiculite
8426506
2. Remove the base plates (2).
3. Loosen the side plates (3) by
turning the front end of the plate
towards the center of the stove.
Then take them out carefully.
4. Remove the back plates
(4) by pulling the side of the
plates forward and out.
When the combustion cham-
ber liner is to be reassembled,
do so in reverse order.
MAX LOAD
The maximum allowable amount of fire-
wood is marked with a series of holes in
the back plates. This means that firewood
may only be filled up to this row of holes.
46
Q-Tee II
Demounting the vermiculite
8426506
Q-Tee II
Demounting the vermiculite
8426506
1
3
2
4
3