Removing The Combustion Chamber Lining - RAIS Attika Q-TEE Series User Manual

REMOVING THE COMBUSTION CHAMBER LINING

Procedure for removing the combustion chamber lining:
1. P ush upwards on the flue plate (1) until it moves
Afterwards, turn it down past the side combustion chamber
lining.
2. L ift up the front combustion chamber lining (2) and remove.
3. Lift up the bottom combustion chamber lining (3).
4. R emove the side combustion chamber lining sections (4) by
turning them inwards at the front until they are loose. They
can now be removed.
5. T his makes it possible to remove the rear combustion
chamber lining (5).
6. L ift up the flue plate (6) until it releases from the fittings and
push it back. It can now be removed.
the combustion chamber lining sections, repeat
To re-install
the above procedure in reverse order.
REMOVING THE COMBUSTION CHAMBER LINING
freely.
1
4
3
2
3
3 4
6
5