AIR KIT - FRESH AIR SUPPLY, AIR THROUGH THE BACK.
When the space heater is installed in a structure where direct combustion air is re-
quired, an air kit must be used to supply fresh air ot the appliance from outside.
1. Remove the reflector plate (1)
2. Mount the air box (2)
3. Mount the reflector plate (1)
4. Remove the knock-out form
in the reflector plate on the back
5. Remove the knock-out form
in the back panel.
6. Remove the knock-out form
in the air channel.
7. Mount the air nozzle (5)
8. Mount the flex hose (6) to the air
nozzle with the hose clamp (4)
9. Mount the air valve on the wall,
over the hole leading to the out-
side.
10. Connect the flex tube to the air
valve using a hose clamp.
56
6
1
0710-FLEKSSLANGE
7
1
0005570
Sponge ring - Air
5
4
2
1
6
4
3