RAIS Q-Tee II USA User Manual page 30

Installation WITH or WITHOUT pedestal.
An optional pedestal base is available for use with the Q-Tee II USA (838040590
High socket complete) and the Q-Tee II C USA (834051090 )
Warning: Floor protection requirements specified in this manual are different de-
pending on whether the appliance is installed with or without the optional base.
When installed WITHOUT optional base.
The floor protection plate must lie under the stove and extend 24" (61cm) in front of
the stove in USA and 30" (76cm) in Canada. The floor protection plate must extend
0" to the back of the stove in USA and 8" (20cm) in Canada. The floor protection plate
must extend 8" to the sides of the stove. For installations with horizontal rear con-
nector, the floor protection plate must extend under and 2" (50.8mm) to either side
of the connector.
The floor protection plate when used WITHOUT the base, must be listed to UL 1618
and is required to have thermal protection with an R value of 3.19 Btu*in/Hrs*ft2*°F
(equal to 0.46 w/mk in SI units).
2" 2" 2" 2"
8" 8"
8"
8"
30