Product-Specific Commands-Description - EXFO IQS-2600B User Manual

SCPI Command Reference
Product-Specific Commands—Description
Product-Specific Commands—Description
Description
Syntax
Parameter(s)
Example(s)
See Also
72
This command is used to stop running scan.
ABORt is an event and cannot be queried as
there is no state associated with it.
:ABORt[1..n]
None
SOUR:WAV:SWE:REP NCON
SOUR:WAV:SWE:DIR BOTH
SOUR:WAV:SWE:CYCL 12
SOUR:WAV:SWE:STAR 1523.45NM
SOUR:WAV:SWE:STOP 1600.45NM
SOUR:WAV:SWE:SPE 25.56NM
SOUR:WAV:SWE:MODE CONT
TRIG SEQ:INP DISABLED
INIT:IMM
ABORT (abort sweep)
INITiate[1..n][:IMMediate]
SOURce[1..n]:WAVelength:SWEep:STATe?
SOURce[1..n]:WAVelength:SWEep:STATe
:ABORt[1..n]
IQS-2600B