Starting A Sweep - EXFO IQS-2600B User Manual

Tunable laser source for iqs platforms

Table of Contents

Operating your Tunable Laser Source

Starting a Sweep

After setting your sweep parameters as explained in Setting Sweep

Parameters on page 29 and that your source is turned on, you are ready to

start your sweep.

To start the sweep, click the Start button in the Instrument function tab.

To stop the sweep before it is completed, click Stop.

Note: You can stop the sweep at any time. Turning the laser on or off will also

stop the sweep.

Tunable Laser Source

Table of Contents

Do you have a question about the IQS-2600B and is the answer not in the manual?