EXFO IQS-2600B User Manual page 105

Description
Syntax
Parameter(s)
Example(s)
Notes
See Also
Tunable Laser Source
Product-Specific Commands—Description
:SOURce[1..n]:WAVelength:SWEep:
This command is used to select the sweep
looping mode. The module can perform the
sweep continuously or execute the sweep
according to the number of cycles specified.
At *RST, the repeat mode depends on the
number of cycles.
:SOURce[1..n]:WAVelength:SWEep:REPeat<wsp
>CONTinuous|NCONtinuous
Repeat:
The program data syntax for the first parameter is
defined as a <CHARACTER PROGRAM DATA>
element. The allowed <CHARACTER PROGRAM
DATA> elements for this parameter are:
CONTinuous|NCONtinuous.
The parameter is indicating whether or not the
sweep will be continuous:
CONTinuous, the sweep is continuous.
NCONtinuous, the sweep will be executed
according to the number of cycles specified.
SOUR:WAV:SWE:REP CONT
This function cannot be performed while the
module is sweeping.
SOURce[1..n]:WAVelength:SWEep:REPeat?
SOURce[1..n]:WAVelength:SWEep:CYCLe
SCPI Command Reference
REPeat
99