Mobile Ddr Memory - Analog Devices ADZS-BF707-BLIP2 System Manual

Hide thumbs Also See for ADZS-BF707-BLIP2:

Table of Contents

Arrow.com.

Downloaded from

10 days of unrestricted use and then becomes disabled. The license can be

re-enabled by activation. Once activated, the evaluation license offers

unrestricted use for a defined period and then becomes disabled until an

additional license is installed.



If installing CCES without using a serial number, you will be lim-

ited to 180 days.

An evaluation license can be upgraded to a full license. Licenses can be

purchased from:

• Analog Devices directly. Call (800) 262-5645 or 781-937-2384 or

go to:

http://www.analog.com/buyonline

• Analog Devices, Inc. local sales office or authorized distributor. To

locate one, go to:

www.analog.com/adi-sales

Mobile DDR Memory

The ADSP-BF707 processor connects to a 2Gb Micron MT46H128M16

chip through the Double Data Rate Synchronous Dynamic Ran-

dom-Access Memory controller. The memory controller on the processor

and the Mobile DDR memory chip are powered by the on-board 1.8V

regulator. The memory controller on the processor can operate at a maxi-

mum clock frequency of 200 MHz. Data is transferred between the

processor and the memory chip on both the rising and falling edges of the

clock.

With a CCES session running and connected to the BLIP2 board through

an emulator, the memory controller registers are configured automatically

each time the processor is reset through a soft reset using CCES. The val-

ues are used whenever mobile DDR chip is accessed through the debugger

(for example, when viewing memory or loading a program).

ADZS-BF707-BLIP2 Board Evaluation System Manual

Using ADZS-BF707-BLIP2 Board

1-7

Table of Contents

Do you have a question about the ADZS-BF707-BLIP2 and is the answer not in the manual?