Advertisement
1.
Using double sided tape, stick internal battery to the bottom part of the device case. Battery
should be glued approximately 15 millimeters from the bottom wall of the case. Picture on the
left.
2.
Connect battery to the PCB.
3.
Gently place PCB into the bottom case.
2x6 socket pinout
PIN
PIN NAME
NUMBER
1
VCC
(10-30)V
DC (+)
2
DOUT 3
3
AIN 2 / DIN 3
4
DIN 2-N/AIN1
5
DIN 1
6
INPUT 6
7
GND (-)
8
DOUT 1
9
DOUT 2
10
1WIRE POWER +3,8 V output for 1–Wire
11
1WIRE DATA
12
INPUT 5
PC Connection (Windows)
1.
Power-up FMU130 with DC voltage 10-30 V power supply using supplied power cable.
LED's should start blinking, see
2.
Connect device to computer using Micro-USB cable or Bluetooth connection:
Using Micro-USB cable
DESCRIPTION
Power supply (+10-30 V
DC).
Digital output, channel 3.
Open collector output.
Max. 0,5 A DC.
Analog input, channel 2.
Input range: 0-30 V DC /
Digital input, channel 3.
Digital input, channel 2,
Negative input, Analog
input, channel 1, Input
range: 0-30 V DC.
Digital input, channel 1.
TX EXT (LVCAN – TX).
Ground.
Digital output, channel 1.
Open collector output.
Max. 0,5 A DC.
Digital output, channel 2.
Open collector output.
Max. 0,5 A DC.
devices.
Data for 1–Wire devices.
RX EXT (LVCAN - RX).
"FMU130 LED
status".
Advertisement
