Table of Contents
Advertisement
5
Slide the new drive all the way into the bay until the locking tab snaps
into place.
6
Reconnect the drive cable, making sure the cable matches the original
position. (See the drive documentation for proper drive jumper settings
and cable orientation.)
7
Close the case. (See "Closing the case" on pag e14 for instructions.)
8
Reconnect the cords you removed, then turn on the computer.
Replacing the hard drive
The hard drive is secured to a drive bay located underneath the drive tray
assembly.
To replace the hard drive:
1
Turn off the computer, disconnect the power cord, and disconnect the
modem cord, if your computer has a modem.
2
Open the case by following the instructions on page 12, observing the
static electricity precautions on page 11.
Replacing the hard drive
19
Advertisement
Table of Contents
