Replacing The Hard Drive In The Hard Drive Kit - Gateway M275 Service Manual

Replacing Gateway M275 Components
Replacing the hard drive in the hard drive
kit
Tools you need to complete this task:
Screws removed during this task:
2 chrome 2.5 × 6 mm
(hard drive kit)
To replace the hard drive in the hard drive kit:
1
Complete the steps in
2
Remove the hard drive kit by following the instructions in
kit" on page
3
Remove the two screws that secure the hard drive to the hard drive kit bracket.
Screw
12
Phillips #0 screwdriver
"Preparing the convertible tablet PC" on page
9.
www.gateway.com
2 chrome 2.5 × 6 mm
(hard drive)
Screw
6.
"Replacing the hard drive