Adding Or Replacing A Hard Drive - Gateway E-4000 User Manual

Adding or replacing a hard drive

Use these instructions to add or replace hard drives.
To replace a hard drive:
1
Identify your computer case style. For more information, see
your computer case style" on page
2
Open the case by following the instructions in
page 107.
3
Disconnect the drive cables, noting their locations and orientation. (You
will reconnect the cables after you install the new drive.) See the drive
documentation for further instructions.
106.
Data ribbon
cable
www.gateway.com
Gateway Mid Tower Case
"Identifying
"Opening the case" on
Power cable
115