Maintenance; Content Check List; Hardware Bag - HMS BE8535 Manual Instruction

Maximum weight of user – 180 kg
Motor: 3,5 hp

MAINTENANCE

Use a soft, damp cloth to wipe the edge of the belt and the area between the belt edge and frame. Also reach as
far as practical directly under the belt edge. A mild soap and water solution along with a nylon scrub brush will
clean the top of the textured belt. This task should be done once a month.
Allow to dry before using.
On a monthly basis, vacuum underneath your treadmill to prevent build-up. Once a year, you should remove the
motor shield and vacuum out dirt that may accumulate.
WARNNING --UNPLUG POWER CORD BEFORE CLEANING/LUBRICATING.

CONTENT CHECK LIST

Warning：Carefully install the product，avoid to make any damage.
Notice：
1) Carefully read the instructions before installation. Operate in accordance with procedures.
2) Check components in the package
3) Remove all paper boxes and foams used as fasteners.
4) Check all the following components. If there is missing or problematic parts, please contact the
dealer

HARDWARE BAG

Multi-wrench 1 pcs
Umbrella-type allen screw M8*20
4pcs
Washer 6pcs
Frame
Homemade wrench 1 pcs
Umbrella-type cross tapping
screw M4.2*15 6pcs
Safety key
Decorative cover
Umbrella-type allen screw M8*60
1pcs
Hardware bag
2pcs
Nut 2pcs
Lubricant 1pcs