Table of Contents
Advertisement
DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Auto Configuration of 3G/LTE
On the Connections Setup / Auto Configuration of 3G/LTE page, you can enable the
function for automatic creation of a mobile WAN connection upon powering the router on.
Figure 103. The Connections Setup / Auto Configuration of 3G/LTE page.
If you want to enable the function for automatic creation of a mobile WAN connection, click the
ENABLE button. If needed, change the settings on this page.
Parameter
Set as default gateway
Create without IMSI
After specifying the needed parameters, click the APPLY button.
If the PIN code check for the SIM card inserted into the built-in LTE modem is disabled, then an
active WAN connection with the operator's settings will be automatically created when powering on
the router. The connection will be displayed on the Connections Setup / WAN page.
If you want to disable the function for automatic creation of a mobile WAN connection, click the
DISABLE button.
Move the switch to the right to allow the router to use an
automatically created mobile WAN connection as the default
connection.
Move the switch to the left if you want the router to continue using
the existing default connection when automatically creating a
mobile WAN connection.
Move the switch to the right to enable automatic creation of a
mobile WAN connection without the operator's settings. This setting
will be useful if the code stored in the SIM card is unavailable.
Move the switch to the left to disable automatic creation of a mobile
WAN connection without the operator's settings.
Page 120 of 302
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
