D-Link DWR-956 User Manual page 37

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
9. In the opened Wireless Network Connection window, select the wireless network
DWR-956 (for operating in the 2.4GHz band) or DWR-956-5G (for operating in the 5GHz
band) and click the Connect button.
10. In the opened window, enter the network key (see WPS PIN on the barcode label on the
bottom panel of the device) in the Security key field and click the Next button.
11. Allow or forbid your PC to be discoverable by other devices on this network (Yes / No).
12. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as a dot with curved lines indicating the signal level.
If you perform initial configuration of the router via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the router you will need to
reconfigure the wireless connection using the newly specified settings.
Figure 22. The list of available networks.
Figure 23. PC discovery settings.
Page 37 of 302
Installation and Connection