D-Link DWR-956 User Manual page 114

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Parameter
Mode of IPv6 address
assignment
Start IP / End IP
SELECT ADDRESS
RANGE
Lease time
The default route for
LAN clients
DNS relay
External DHCP server IP
When all needed settings are configured, click the APPLY button.
Dynamic IP Addresses
Select the needed value from the drop-down list.
Disable: Clients' IPv6 addresses are assigned manually.
•
Stateless: Clients themselves configure IPv6 addresses
•
using the prefix.
Stateful: The built-in DHCPv6 server of the router allocates
•
addresses from the range specified in the Start IP and End
IP fields. Also when this value is selected, the Static IP
Addresses and Hosts sections are displayed on the tab.
Relay: An external DHCP server is used to assign IPv6
•
addresses to clients. When this value is selected, the
External DHCP server IP field is displayed on the tab.
Available if the Router, WISP Repeater, or Mobile
Internet mode was selected in the Initial Configuration
Wizard.
The start and the end values for the latest hextet (16 bit) of the range
of IPv6 addresses which the DHCPv6 server distributes to clients.
Use the button to set one of the available IP address ranges. In the
window displayed, select the needed range and click the SAVE
button to automatically fill in the Start IP and End IP fields.
The lifetime of IPv6 addresses provided to clients.
Move the switch to the right to let the clients, that received IPv6
addresses or configured them using the prefix, use the router as the
default IPv6 route.
Move the switch to the right so that the devices connected to the
router obtain the address of the router as the DNS server address.
Move the switch to the left so that the devices connected to the
router obtain the address transmitted by the ISP or specified on the
Advanced / DNS page as the DNS server address.
The IPv6 address of the external DHCP server which assigns IPv6
addresses to the router's clients.
To specify several IPv6 addresses, click the ADD button, and in the
line displayed, enter an IPv6 address.
To remove the IPv6 address, click the Delete button (
line of the address.
Page 114 of 302
Configuring via Web-based Interface
Description
) in the