Auto Configuration Of 3G/Lte - D-Link DIR-882 User Manual

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual

Auto Configuration of 3G/LTE

On the Connections Setup / Auto Configuration of 3G/LTE page, you can enable the
function for automatic creation of a mobile WAN connection upon plugging a USB modem into the
router.
Figure 109. The Connections Setup / Auto Configuration of 3G/LTE page.
If you want to enable the function for automatic creation of a mobile WAN connection, click the
ENABLE button. If needed, change the settings on this page.
Parameter
Set as default gateway
Create without IMSI
After specifying the needed parameters, click the APPLY button.
Move the switch to the right to allow the router to use an
automatically created mobile WAN connection as the default
connection.
Move the switch to the left if you want the router to continue using
the existing default connection when automatically creating a
mobile WAN connection.
Move the switch to the right to enable automatic creation of a
mobile WAN connection without the operator's settings. This setting
will be useful if the code stored in the SIM card is unavailable.
Move the switch to the left to disable automatic creation of a mobile
WAN connection without the operator's settings.
Page 128 of 303
Configuring via Web-based Interface
Description