D-Link DWR-956 User Manual page 267

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
To change the web-based interface language, in the Miscellaneous section, select the needed
value from the Language drop-down list.
To change a period of inactivity after which the router completes the session of the interface, in the
Miscellaneous section, in the Idle time field, specify the needed value (in minutes). By default,
the value 5 is specified. Then click the SAVE button.
In the Action section, the following buttons are available:
Control
Factory
Backup
Restore
Save
Reboot
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Left Side Panel section, page 16).
Click the button to save the configuration (all settings of the router)
to your PC. The configuration backup will be stored in the
download location of your web browser.
Click the button and follow the dialog box appeared to select a
previously saved configuration file (all settings of the router)
located on your PC and upload it.
Click the button to save settings to the non-volatile memory.
The router saves changed settings automatically. If changed settings
have not been saved automatically, a notification is displayed in the
top right part of the page.
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
Page 267 of 302
Configuring via Web-based Interface
Description