D-Link DWR-956 User Manual page 211

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Parameter
Bound interface name
Local SIP port
In the Profile List section, the list of existing profiles with their status is displayed.
To create a new profile, click the ADD button (
In the opened window, you can specify the following parameters:
Parameter
Enable
Enable DHCP option
120
Name
When all needed settings are configured, click the SAVE button.
To edit an existing profile, in the Profile List section, select the relevant line in the table. In the
opened window, change the needed parameters and click the SAVE button.
To remove an existing profile, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
When all needed settings are configured, click the APPLY button.
From the drop-down list, select a WAN connection for VoIP. The
list is displayed if the Connection value is selected from the
Interface type drop-down list.
A port of the router for outbound SIP traffic. Unless another setting
is given by your ISP, it is recommended to leave the default value
(5060).
Figure 163. The window for adding a profile.
Move the switch to the right to enable the profile.
Move the switch to the left to disable the profile.
Move the switch to the right to allow using DHCP option 120.
Move the switch to the left if your provider does not require
automatic obtainment of the SIP proxy server address.
The name of the profile for easier identification. You can specify
any name.
).
Page 211 of 302
Configuring via Web-based Interface
Description
).
Description