D-Link DWR-956 User Manual page 172

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Parameter
Short GI
Beacon period
RTS threshold
Frag threshold
DTIM period
Station Keep Alive
When you have configured the parameters, click the APPLY button.
Guard interval (in nanoseconds). This parameter defines the interval
between symbols transmitted when the router is communicating to
wireless devices.
Enable: The router uses the 400 ns short guard interval.
•
Only for the wireless network operating modes which
support 802.11n and 802.11ac standards (see the value of the
Wireless mode drop-down list on the Wi-Fi / Basic
Settings page).
Disable: The router uses the 800 ns standard guard interval.
•
The time interval (in milliseconds) between packets sent to
synchronize the wireless network.
The minimum size (in bytes) of a packet for which an RTS frame is
transmitted.
The maximum size (in bytes) of a non-fragmented packet. Larger
packets are fragmented (divided).
The number of beacon frames between sending DTIM messages
(messages notifying on broadcast or multicast transmission).
The time interval (in seconds) between keep alive checks of wireless
devices from your WLAN. When the value 0 is specified, the
checking is disabled.
Page 172 of 302
Configuring via Web-based Interface
Description