D-Link DWR-956 User Manual page 269

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
In the opened window, specify the following parameters:
Control
Command
Action
Button press duration
Click the SAVE button.
To edit the parameters for a command, select the relevant line in the table. In the opened window,
change the needed parameters and click the SAVE button.
To remove a command, select the checkbox located to the left of the relevant line in the table and
click the DELETE button (
After specifying the needed parameters, click the APPLY button.
Figure 201. The window for adding a command.
Reset / Wi-Fi / WPS
From the drop-down list, select a command.
From the drop-down list, select an action for the command.
Single click: One short press of the button lasting less than
•
one second.
Double click: Two short presses of the button.
•
Long press: Pressing of the button for several seconds.
•
When this value is selected, the Button press duration
section is displayed.
Specify a period of time (in seconds) within which you should hold
the button to perform the specified action. You can specify values
from 2 to 60.
).
Page 269 of 302
Configuring via Web-based Interface
Description