D-Link DWR-956 User Manual page 154

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Parameter
RADIUS server port
RADIUS encryption key
Encryption type
Group key update
interval
802.11w (Protected
Management Frames)
When you have configured the parameters, click the APPLY button.
To edit the basic or additional wireless network, left-click the relevant line in the table. On the
opened page, change the needed parameters and click the APPLY button.
To remove the additional network, select the checkbox located to the left of the relevant line in the
table and click the DELETE button (
A port of the RADIUS
The password which the router uses for communication with the
RADIUS server (the value of this parameter is specified in the
RADIUS server settings).
An encryption method: TKIP, AES, or TKIP+AES.
The time period (in seconds), at the end of which a new key for
WPA encryption is generated. When the value 0 is specified for this
field, the key is not renewed.
For WPA2 authentication type only.
Protected Management Frames help to improve packet privacy
protection for wireless data transmission. Select a value for the
wireless network from the drop-down list.
Disabled: Protected Management Frames are not used.
•
Optional: Protected Management Frames are optional.
•
Required: Protected Management Frames are required.
•
When this value is selected, devices not supporting the
802.11w standard cannot connect to the wireless network.
). Then click the APPLY button.
Page 154 of 302
Configuring via Web-based Interface
Description
server.