Advertisement
"Sometimes
the tape begins to Nay or
rewind when l don't want it to/_
This Dual-Deck
VCR can automatically
play a tape
(with no record safety tab in place) whenever
you load
it, and it will automatically
rewind the tape when it
reaches the end. AUTO PLAY/REWIND
can be turned
on or off via the AUTO PLAY/REWIND
selection
in the
SET UP menu.
Also, when EZ COPY in the FEATURES
menu is on,
both decks will automatically
rewind befi_re recording
when you start a copy tape procedure.
This process can
be disabled by pushing
the STOP key on Deck Two.
"Ny On°Screen Display hasa message
that says ERROR."
This means the VCR has had difficulty with the tape
mechanism.
To reset, turn the power off and then on
again. If this does not clear the error, unph_g the VCR
fiom the wall outlet and inspect both tape slots %r
%reign o_ects,
orjammed
or crooked tapes. If this
does not help, constflt a service center.
"Ny VCRdoesn't worR/'
A strong static electricity
shock or other un%reseen
circumstances
can cause the control system of your
Dual-Deck
VCR to lock _@. To reset the control system,
first unpfiJg the power cord from the wall outlet %r 20
seconds and phJg it in again. If this doesn't restore
all
operations
to normal, _mplug it again 10r 15 minutes.
You will then need to reset the clock (if the clock is still
set, you haven't unplugged
it long enough). If these
steps do not correct the problem,
the Dual-Deck
VCR
must be serviced by an authorized
service center.
"Why aren't
the Counters moving?"
If the VCR is playing an unrecorded
or blank tape, the
counter cannot operate. The VCR relies on the control
track that is always recorded
on to the video tape to
provide counter in%rmation.
APPENDIX C - HELP-COMMONLYASKED QUESTIONS 65
Advertisement
