Advertisement
FEATURES
MENU
*SETUP MENU
2: COPY MODE
HQ1
3: SPEED MATCHING ON
4: COPYAUDIO iNSERT OFF
5: EZoCOPY
OFF
6: PLAYBACK MODE NORM
7: RECORD M ODE
NORM
PRESS SELECT/CHANGE
TO
SET
AND
MENU
WHEN
BONE j
SETUP MENU
: SET CLOCK/LANGUAGE
2:TUNER
SETUP MENU
3:AUTO
PLAY/REWIND
BOTH
4 : ON-SCREEN DISPLAY AUTO
5" DATE/TIME
STAMP
ON
6: SECOND TV ViEW
AUTO
7: AUX mNPUT
FRONT
PRESS SELECT/CHANGE
TO
SET AND MENU WHEN DONE,
J
f
TUNER SETUP MENU
CH_#
SAPIS
AVAILABLE
*ANTENNA
SOURCE
TV
AUTO PROGRAM
ADD CHANNEL
DELETE CHANNEL
TUNER AUDIO
STEREO
PRESS
SELECT/CHANGE
TO
SET AND MENU WHEN DONE
J
NOTE:
tn cases ot poor or weak video
reception, .your Tuner Setup menu may
not be visible. W/ten this happens, select
a strong local channel
where the
menu wilt be visible again.
Setting
Antenna
& £hanne| Memory
Once you have your Dual-Deck
VCR hooked up to your
antenna
or directly
to a cable system without
a cable
converter
box, you'll need to set the antenna
and the
channel memory. If you are using a cable converter
box, you will need to set your VCR's tuner channel to
receive only the ca ble converter box output channel.
Your Dual-Deck VCR comes with a 181 channel MTS
tuner capable of receiving both over-the-air and cable
broadcasts in stereo. Reception for channels 2-13 are
the same on regular broadcast or on cable TV. But
above channel 13, cable TV (CATV) reception is
different
from broadcast
TV.
1. Press _q
on your remote control. The Features
menu will appear.
2. Press @. The Setup menu will appear.
3. Press @. The Tuner Setup menu will appear.
4. Set the ANTENNA
SOURCE. Press CHANCE
to
cycle between TV and CATV (cable). When the
desired option is on the screen, go to step 5.
5. Press _
(Mute button) to move to
AUTO PROGRAM.
6. Press _
(LCV button) to begin automatic
channel programming.
The VCR will go through
all possible TV or cable channels,
and will auto-
matically
put the channels
which you receive
into Channel
Memory. This will take a few
minutes
to complete.
7. If you wish, you can program
certain channels
into
Channel
Memory or remove them fiom Channel
Memory manually.
You can also select stereo
sound. To do this, see the TUNER SETUP menu
section of this manual. See page 35.
8. Press _J,
to save the changes and to exit to
the SETUP menu.
9.
Press _/until
you exit the menu system.
CHAPTER2 - OPERATING YOUR DUAL-DECKVCR
17
Advertisement
