Advertisement
CABLE
OUTLET
Coaxial CaNe
TV BACK PANEL
VCR Cable
(supphed)
CaNe Converter
Box
@
..................
<3© ©
WO[_T
COt4'rRot
mT
DUAL-DECK
VCR BACK PANEL
Use these connections
if you have a converter
box
with your cable system. You will be able to record any
cable channel which you subscribe
to and watch that
channel. With these connections
(including Timer
Record) you must always keep your Dual-Deck
VCR
tuned to the same channel
(2, 3 or 4). You must also
select the desired channel Dr a timer recording
on
the cable converter
box.
1.
Place your Dual-Deck
VCR next to your TV and
plug the VCR power cord into a wall outlet.
Disconnect
all antenna
and cable connections.
2.
A cable is supplied
with your Dual-Deck
VCR.
Connect one end of this cable to the TV OUT
connection
on the back of your VCR. Connect the
other end of the cable to the VHF IN or CABLE
IN connection
on the back of your TV.
3.
Attach the cable that comes out of your wall to the
_nput connection
on the back of your cable con-
verter box.
4.
Attach one end of the cable supplied
with your
cable converter
box to the output connection
on
the back of the box. Attach the other end to the
ANT IN connection
on the back of your VCR.
5.
Turn on the power R_r your VCR, TV and
converter.
Use the numeric
keys or the channel
up/down
buttons
to set your VCR to 2, 3 or 4. Call your
cable company
if you do not know which
of these
channels
to use.
7.
Set the Dual-Deck
VCR back panel switch to
either
CH 3 or 4. See pages 39 and 40.
CHAPTER4 - CONNECTING YOURDUAL-DECKVCR 47
Advertisement
