Advertisement
NOTE:
For proper ventilation,
your Dual-Deck
VCR needs at least 3/8"clearance
aft
around it. Make sure you have enough
morn on your shelfto
provide
this clearance.
Your Dual-Deck
VCR connects
to your TV and
antenna
in exactly the same way as any other VCR.
If you already own a VCR, take a few minutes
to note
how the VCR is hooked up. Then simply swap the
Dual-Deck
with your old VCR using the same settings
and connections.
Here are some things you should take note of in your
current hookup:
1. Which cable attaches
to the VCR's ANTENNA
IN
.jack on the back of the VCR.
2. Which cable attaches
to the TV OUT jack on the
back of the VCR.
3. Which channel your TV is tuned to (to watch the VCR).
4. Which channel
(3 or 4) is set on the back of your VCR.
5. If you have a cable converter
box leading
into your
VCR, you will need to note which channel
(2, 3 or 4)
your VCR is tuned to.
Note:
}Our exact L,ookup _,itl cl_t)eHd oll
whetlle_ oz ¢?otyou subsc,'Tbeto c_bJe TV
ol,,d whetL,ecyou have a r'z#decon,<elm1
box of o,_/le, '"equiI;meHt puc']l as lase,'
clisc pMye£ satel/ite recdve£ etc,),
6. Be sure to insert the two supplied AA batteries in the
remote control
_LD
ANTENNA
CABLES
or
(not supplied}
Twin Lead
TV BACK PANEL
(supplied)
L
UUUUUUUUU
co,Not
PORT
, © "ia
DUAL-DECK
VCR BACK PANEL
Basic (}onnections
2.
Place your Dual-Deck
VCR next to your TV and
plug the VCR power cord into a wall outlet. Discon-
nect all antenna
and cable connections.
A cable is supplied
with your Dual-Deck
VCR.
Connect
one end of this
cable to the TV OUT
connection
on the back of your VCR. Connect the
other
end of the cable to the VHF IN or CABLE
IN
connection
on the back of your TV.
44
DISCOVERTHE DUAL-DECKDIFFERENCE
Advertisement
