Advertisement
DECK TWO/ONE MENU
t : RECORD S PEED
SP
2: TAPE LENGTH
T120
3*TIMER RECORDRNG
4: RECORD S OURCEAUTO
5: HFF_ A UDIO
ON
PRESS SELECT/CHANGE
TO
SETAND MENU WHEN DONE
Reeerd $euree [Menu,4]
Press @ to select this item. Subseqtmnt
pressings
of this number
will cycle this feature between
AUTO, Deck One, TUNER,
and AUX on Deck Two.
(Deck One record sources are TUNER and AUX.)
You can also use _
(Mute button) to highlight
this item and _
(LCV button) to change
this f>ature.
2. When the desired setting
is shown on the screen,
either
press
_,
to exit this
menu
or move to
another
Rein.
If AUTO is selected, the current view is automatically
selected when the _
key is pressed.
ff Deck One is selected, you will record the tape
playing in Deck One or Tuner if Deck One is stopped.
TUNER records the channel you select on your VCR.
When AUX is selected,
the incoming signal is fiom the
kont or rear panel jacks and this is what is recorded
when you press the @
key.
NOTE:
Hi-Fi Audio automatically
resets to ON
when the W'R power is turned off to
prevent
accidental
omission of the Hi-Fi
Audio track during Copy _pe.
tf Hi-Fi
Audio is set to OFF during Copy Tape, the
original monaural
linear audio track will
be copied to both t,be linear and Hi-Fi
audio tracks on the duplicate
tape.
Hi-Fi Audi@ [Menu, 5]
When you Select ON, this means that during tape
playback
you will hear the Hi-Fi audio track on your
tape; if you select OFF, you will hear the monaural
linear audio track on your tape. This feature
is usehfl
when playing
a tape with voice-over narration.
1. Press @ to select this item. Subsequent
pressings
of this nmnber
will cycle this feature between
ON
and OFF.
You can also use _
(Mute button) to highlight
this Rein and @
(LCV button) to change
this feature.
2.
When
the desired
setting
is shown
on the screen,
either
press
_,
to exit this
menu
or move to
another
item.
CHAPTER3 - PROGRAMMING YOURDUAL-DECKVCR 41
Advertisement
