Advertisement
SequentiaU and LoopNay
With sequen_i_dpMy; your Dual-Deck VCR will p lay
a tape in Deck One, then automatically
activate
Deck Two to begin playing when the tape in Deck One
is through.
1-2 will appear on the Front Panel Display.
With/ooppk!y,
your Dual-Deck
VCR will play a tape in
Deck One, then automatically
activate
Deck Two to
begin playing. The tape in Deck One will rewind while
the tape is Deck Two is playing. When the tape in Deck
Two finishes,
it will automatically
rewind and the tape
in Deck One will play again. This process will continue
until you press _.
LOOP will appear on the Front
To activate
Sequential
or Loop play:
1. Press _
to bring up the Features
menu.
2. Press @ to highlight
Playback
Mode.
3. Use _
(LCV button) to cycle between SEQ,
LOOP and NORM.
4. When the desired choice is on the screen, press
_]
twice to exit the menu system.
Occasionally,
when you play a tape that was recorded
on a diflbrent
VCR or on a VHS camcorder,
visual
noise (white streaks)
may appear on the screen. This
means the recorded
tracks do not align precisely
with
the playback
heads on your VCR.
Your Dual-Deck
VCR is equipped
with an Automatic
Digital Tracking
System. This system is activated
whenever
you insert a tape to play_ You'll see ATR on
the on-screen
display and the ATR indicator
is on.
Sometimes,
however, you may need to use the man-
ual tracking
keys to adjust the picture. Press the
and out of the picture,
When
you do this,
the Auto-
matic
Digital
Tracking
System
is disa bled. The ATR
indicator
on the flont
panel
is off. It ('an be reactivated
by pressing
_,
on the remote
control
or front
panel
for 1.5 seconds.
20
DISCOVERTHE DUAL-DECKDIFFERENCE
Advertisement
