Advertisement
TUNER SETUP MENU
OH:#
SAP iS AVAILABLE
*ANTENNA
SOURCE
TV
AUTO PROGRAM
ADD CHANNEL
DELETE CHANNEL
TUNER AUDIO
STEREO
PRESS SELECT/CHANGE
TO
SET AND MENU WHEN DONE
NOTE:
tf you press _
and do not get the
Features
menu, continue pressing
untit you see the Features
menu.
Tuner Setup Menu
[Menu,
1,2]*
Use theTuner/Channelmenu tosetyour antenna
sourceand channelmemory. While intheSetup menu,
press
@.
Anteana
Source
Set your antenna
source, Use _
(LCV button) to
switch between the %llowing options: TV and CATV,
Select TV if you do not have cable. If you subscribe
to
cable, select CATV.
Aute Pregram
Use _,
(Mute
button)
to move to this
item.
Press
_J
(LCV button)
to begin
autonmtically
programming
channels
into memory.
Auto Program
goes through
all the possible
TV or cable channels
one by one. Any time it finds
a channel
with
a signal
(a channel
that
you receive),
it programs
that
channel
into channel
memory.
Once you have run Auto Pro-
gram,
the channel
selector
on your Dual-Deck
VCR
or remote
control
will stop only at the channels
which
you receive.
Add ChannN, Delete ChannN
You can add or delete
any channel
by using
the
number
keys to tune
in to that
channel,
then
using
the
(Mute
button)
key to move to Add or Delete
and
then
pressing
@,
(LCV button).
NOTE:
For your convenience,
the Tuner
Audio has been set to Stereo
(SP) at the tactory.
During normal operation,
the ;tuner
Audio output is displayed
on line 3 of the
on screen display. When t,be Menu
setting is Mono, Mono is displayed
on
line 3. When the menu setting is Stereo,
SAP or TV+SAR line 3 wifl display the
audio current,!y being received
on the tuned channel.
While in Tuner Setup menu, line 3 will
display 'SAP tS AVAILABLE'
to alert you
when the audio signal being received
on
t,be tuned station contains a Second
Audio Program {<_ee page 38).
Tuaer Audio
This
feature
sets the audio
output
from the Dual-Deck
VCR tuner.
Mono
produces
monaural
sound
for all
programs.
Stereo
produces
stereo
smmd
if the pro-
gram
is broadcast
in stereo;
otherwise
the sound
is
mono.
SAP produces
Second
Audio
Program
sound,
usually
a second
language.
All SAP broadcasts
are
mono.
TV+SAP
produces
normal
sound
fiom one
speaker
and SAP sound
fiom the other.
1. Press
@ to select
this item.
Subsequent
pressings
of this
number
will cycle this
feature
between
Stereo,
Mono,
SAP and TV+SAP.
You can also use _J
(Mute
button)
to highlight
this
item
and _
(LCV button)
to change
this
feature.
CHAPTER3- PROGRAMMING YOURDUAL-DECKVCR 37
Advertisement
