Advertisement
STOP/EJECT
TRACKING
TUNER
TV/VCR
VIEW
VCR
WEEKLY
ZERO RETURN
Press this button on the remote control to stop the
tape in the active deck. Press again to eject a
stopped
tape.
Occasionally,
when you play a tape that was recorded
on a different
VCR or camcorder,
white streaks
appear if the recorded
tracks
do not align precisely
with the playback
heads on the VCR. Pressing
the
Tracking
buttons
on the remote control allows you to
manually
adjust the tracking
while playing a tape.
Device used to receive signals
coming into your
television
which selects the one channel you want to
watch flom all the diflerent
channels
which you
have available.
The Dual Deck VCR has a 181 channel
tuner. See pages 17 and 35 %r a detailed
explanation.
Press to switch control of the picture between the TV
and the VCR. This is the antenna
switch. When set to
TV, the antenna
signal goes directly to the TV bypass-
ing the VCR; when set to VCR, the antenna
signal
goes through
the VCR. When the VCR power is off,
it is the same as TV mode.
The signal chosen to be seen on the TV or monitor
(Deck One, Deck Two, Tuner, AUX).
This indicator
will be on when the VCR is in VCR
mode and off when the VCR is in TV mode.
Weekly Timer Recording
Event which repeats
every
seven days at the same time,
From stop, press this button and the currently
active
deck will %rward or return
to counter time (00:00:00)
and stop.
62
DISCOVERTHE DUAL-DECKDIFFERENCE
Advertisement
