Advertisement
,
CHANGE (LCV) - Press to cycle through
selections of the mentJ item selected when
in On-Screen
Programming.
When not in
On-Screen
Programming,
press to retm'n to
the 'Last Channel Viewed'.
S
_i:!ii:i!i!!!i!!i!!i!!!i:i
P
Front Pane| Display
The Front Panel Display tells you what is happening
as you use your Dual- Deck VCR. This Front Panel
Display will show the following: STOP, PLAY, EJECT,
REC, REW, FF, REVEW, CUE, ON, OFF, LOOP,
SLOW, PAUSE, STILL, END, PIG, 1-2.
i iiiii!
VC
R
AT
R
A :::::: M
The Front
Panel
Display
also has several
indicators/
icons. Each
indicator
on the Front
Panel
Display
shows
the status
of one of the VCR's functions.
[]
VCR
Timer
° If you have programmed
the VCR to
record a TV show at a certain
time (Timer
Record), the Timer indicator
will be ON, It will
also be on while the VCR is recording
a
program.
It will blink if there is a timer error.
Record
Indicator
* This indicator
will be on
during Record, OTR and Timer Record.
Power
Indicator
* This indicator
will blink
when VCR is in the auto power off mode.
VCR Indicator
* This indicator
will be ON
when the VCR is in VCR mode and offwhen
the VCR is in TV mode. Use the TV/VCR key
on your remote to select the mode.
COUNTER/CLOCK
* This display shows the
clock time while viewing Tuner or Aux, The
clock time displays
in hours and minutes,
with
AM and PM indicated.
Counter
is shown while
viewing Deck One or Deck Two. Pressing
the
CTR/CLK key on the remote switches this
display between
the clock and the counter.
OTR Indicator
* One-Touch Recording.
This
indicator
will be on during
One-Touch Record-
ing. The display will also show the amount of
time programmed
f_r recording.
Each time you
press the REC key after the first time, you get
30 minutes
of record time (i.e., pressing
REC 3
times will restflt in 60 minutes
of record time).
CHAPTER1 - THE DUAL-DECKSYSTEM 9
Advertisement
