Advertisement
_**PLAY HSP =H:MM:SS TUNER
CH##
STEREO
FRINOV 29'962:!2AM
REC HSPH:MM:SS D ECK 1
NO TE:
An asterisk in a box - [], wilt appear
on t,bescreen to the left of the
current!y selected TVview.
On-Screen Display
The ()n-Screen
Display
contains
information
about
the status
of each deck. The On-Screen
Display
appears on your screen automatically
when you turn
the power on, when you press a deck function
key
(such as Play, Rewind,
etc.) and when you change
channels.
The On-Screen
Display
also shows any
Timer
Record errors
and status.
This automatic
display
will
disappear
after a few
seconds. You can also manually
summon
the on-screen
display
by pressing
the OSD key on the remote
control.
If you do this,
the On-Screen
Display
will remain
on
the screen
until you press
OSD again.
If you don't want
the On-Screen
Display
to come on
automatically,
you can set the DISPLAY
MODE
in the
SETUP
MENU
to OFF.
The On-Screen
Display has three basic parts:
Dale/_q'me
This indicator
displays the current
date
and time.
Deck _mZus
CH
Displays the tape status (such as Play,
tape speed, Rewind, etc.), current tape
counter time, and record source. OTR
and the duration
will be displayed
if
One-Touch Recording is in progress.
The channel indicator
displays
the
channel that the Dual Deck VCR is
tuned to.
H
In addition,
the tuned channel's
audio
mode (Mono, Stereo, SAP or TV/SAP) is
displayed
below the CH indicator.
A small H' will appear next to the
Tape Speed to indicate
when a tape
with Hi-Fi Audio is being recorded
or played.
14
DISCOVERTHE DUAL-DECKDIFFERENCE
Advertisement
