Advertisement
f
FEATURES
MENU
t* SETUP
MENU
2: COPY
MODE
HQ1
3: SPEED
MATCHING
ON
4: COPYAUD_O
iNSERT
OFF
5: EZ=COPY
OFF
6: PLAYBACK
MODE
NORM
7: RECORD
MODE
NORM
PRESS
SELECT/CHANGE
TO
SET
AND MENU
WHEN
DONE
NOTE:
lf you press @
and do not get the
Features
menu, continue pressing
until you see the Features
menu.
NOTE:
tf t,bis feature is OFF,check the
record speed on Deck Two before
copying a tape to be sure it is
set as .you want it.
Features
menu
Cepy Mede
[Menu, 2]*
HQ Copy uses Go-Video's
patented
AmeriChrome
Cir-
cuitry
fi)r optimum
duplicating
resuks.
You can choose
HQI or HQ2 depending
on your particular
needs.
Optimum
results
will be obtained
when using HQI if
the source tape is in SP or any tape with Copy Guard.
For source tapes in EP or LP without
Copy Guard, use
HQ2 for best results.
1. Press _
to select this item. Subsequent
pressings
of this number
will switch this selection
between
HQI and HQ2 modes.
You can also use _
(Mute button) to highlight
this item and _
(LCV button) to change
this f>ature.
2. When the desired setting
is shown on the screen,
either press
_,
to exit this
mem_ or move to
another
item.
Speed Matching
[Menu, 3]*
Speed matching
automatically
sets the record speed to
be the same as the current
playback
tape. You will get
the best quality copy when this f>ature is turned
ON.
1. Press _
to select this item. Subsequent
pressings
of this number
will turn this f>ature ON or OFF.
You can also use _
(Mute button) to highlight
this item and @,
(LCV button) to change
this feature.
2.
When
the desired
setting
is shown
on the screen,
either
press
_]
to exit this
menu
or move to
another
item.
¢epy Audio insert [Menu,
4 ]*
The Dual-Deck's
Copy Audio Insert
leature
allows you
to add taped music or voice-overs
to a video tape copy,
replacing
the tape's
original
audio track.
When
Copy Audio
Insert
is ON, the audio signal
comes
fiom your AUX IN input
sotJrce
(Audio In jack
on the
Front
Panel)
instead
of fiom the tape
in Deck one
being copied.
1. Press _
to select this item. Subsequent
pressings
of this nmnber
will cycle this f>ature between ON
and OFK
You can also use _
(Mute
button)
to highlight
this
item
and @
(LCV button)
to change
this
feature.
CHAPTER3 - PROGRAMMING YOURDUAL-DECKVCR 33
Advertisement
