Advertisement
X
m
w
_L
ACTIVE DECK
ALWAYS
AMERICHROME
COPY
ATR
AUDIO COPY INSERT
AUTO
CATV
CH MEMORY
CLEAR
CHANNEL
COUNTER
COPYTAPE
CTR
The deck you have control of To see which deck that
is, look at the LEDs on the front panel of the VCR.
Use the Deck Select key to control which deck
is active. Green : Deck One and Red = Deck Two.
A Timer Recording
Event which starts every day of the
week (Sunday - Saturday).
Special circuitry
which gives particularly
high quality
tape duplication,
This is also called HQ Copy.
Auto tracking. Automatically
adjusts the tracking
for
better picture
q_lality. Pressing
the PLAY key for 1.5
seconds initiates
this feature.
The ability to record new audio flom the audio input
.jacks on the flont panel when copying a tape.
A preset automatic
f>ature.
Cable television
channel
assignments.
During At, to Programming,
in the Ttmer Setup
menu, the VCR selects the channels
it can tune in, to
add to the channel list used.
A button on the remote control which allows you
to clear programming
entries in the Timer Recording
menu. It also resets the counter to zero for the
active deck,
Two buttons
on the remote control and on the front
panel which allow you to change to the next higher or
next lower channel.
If you use these buttons,
the VCR
will only stop at the channels
you have programmed
into Channel
Memory in the Tuner Setup menu.
A display that describes
the relative
position of the
tape in hours, minutes
and seconds.
A key that initiates
the duplicating
of a tape in Deck
One to a tape in Deck Two.
The counter key on the remote control.
APPENDIX B-GLOSSARY
59
Advertisement
