Advertisement
Monitor
Connections
TV 1 BACK PANEL
TV 2 BACK PANEL
DUAL-DECK
VCR BACK PANEL
NOTE:
A monitor-style TYis not the same
as a computer monito_
NOTE:
See item number 6, Second TVView,
in the Setup Menu to program the
source for OUT2.
Some Dual-Deck
VCR owners
may have
a monitor-
style TV. Monitor-style
TVs offer improved
picture
and
sound
quality
over standard
TVs because
they receive
the video and audio
signal
directly
fiom the VCR. A
standard
TV receives
the video and audio
signal
fiom
the VCR indirectly,
through
what
is called
an RF
modulator.
This
is a miniature
broadcasting
station
in
your VCR that
sends
the signal
to your TV. The TV
OUT connection
on the back of your Dual-Deck
VCR
transmits
the signal
from the RF modulator.
The
direct
VIDEO
and AUDIO
OUT connections
give you
better
quality
than
the RF modulator
connection,
in
the same
way that
a face-to-face
conversation
is
clearer
than
a conversation
through
a walkie-talkie.
If practical,
use the VIDEO
and AUDIO
OUT connec-
tions
on the back of your VCR instead
of the TV OUT
connection.
To view
the VCR output
on the monitor,
you have
to switch
the monitor
to 'VIDEO,"AUX,'
or LINE.'
Refer to your monitor
owner's
manual
R)r the
correct
setting.
When
you use these
VIDEO
and AUDIO
OUT connec-
tions
instead
of the TV OUT connection,
the TV/VCR
key has no effect on the picture
you see when
using
your VCR. F_ut it still switches
the antenna
and
any
device
attached
to TV OUT.'
If you use the AUDIO OUT connections,
your stereo
TV's speakers
will deliver stereo sound. If you use the
TV OUT connection,
your stereo TV's speakers
will
deliver mono sound.
CHAPTER4 - CONNECTING YOURDUAL-DECKVCR
51
Advertisement
