Table of Contents
Advertisement
Work with the Files List
1.
From the Acquisition screen, select Files.
The Files collapsed list opens.
2.
Perform one of the steps below:
If
You want to transmit one
patient report
You want to transmit multiple
patient reports
3.
Perform one of the steps below:
To transmit the report(s) ...
To the default destination
To another configured
destination
The selected patient reportss are added to the Queue, processed and
transmitted to the selected destination. The Job Status can be viewed in the
Queue. See
If you select patient reports for transmission from the expanded Files list, the
message displays on the notification area in the lower, right-side of the screen:
<Count> reports added to the queue, where <Count> is the number of selected
reports.
90
Then
Select the Rhythm or Full Disclosure report or ECG patient
report you want to transmit to a configured destination.
The selected patient report opens in a new tab (ECG or FD
Report or Rhythm tab), depending on the report type.
Select the Expand icon to expand the Files list, and select the
check box next to the patient reports to be transmitted.
Perform the following:
Select the Transmit icon:
1.
2.
3.
One or more destinations must be configured for the Transmit
icon to be enabled. If no destinations are configured, the
Transmit icon is disabled.
Display the Report Queue on page
MAC VU360
™
Resting ECG Analysis System
Select anywhere around the ellipsis icon on the lower, left-
side of the screen to expand the Transmit menu.
From the expanded Transmit menu, select any configured
destination to transmit the patient report(s).
Select the Transmit icon:
99.
2088531-370-2
Advertisement
Table of Contents
