Vehicle Fluids 4.11 - Wacker Neuson BPS Series Operator's Manual

4.10.1 Threaded fittings
4.11 Vehicle fluids
[en-US] | Version: 5 | 04/2023 | 5100066824 | BPS1030B, BPS1135B, BPS1340B, BPS1550B, BPS2050B | BPS |
Operator's Manual
Moving/rotating machine parts can cause crushing. Hot machine parts
can cause burns if touched.
• Do not service, repair, adjust or clean the machine when it is
switched on.
• Switch off the machine and let it cool down.
Caution! Risk of injury due to missing or loose screw connections.
Missing or loose screw connections can lead to loose machine parts.
People can be injured as a result.
• All threaded fittings must comply with the specified specifications and
be firmly bolted together.
• Observe the correct tightening torques.
• Screws and nuts must not be damaged, bent or deformed.
• Particular attention should be paid to the following:
– Self-locking nuts and micro-encapsulated screws must not be
reused after loosening. The fastening effect is lost.
– Screw connections with adhesive securing/liquid adhesives (e.g.
Loctite) must be cleaned after loosening and provided with new
adhesive before reuse.
Information! Observe the instructions of the liquid adhesive manufac-
turer.
Warning! Danger of scalding from hot operating materials.
Operating materials can become very hot after a short operation period.
Contact with hot operating materials can lead to severe scalding.
• Switch off the machine and let it cool down.
• Use protective gloves.
Warning! Risk of fire and explosion from flammable cleaning agents.
Flammable detergents can cause fires and explosions. People can be in-
jured as a result.
• Do not clean the machine and components with gasoline or other sol-
vents.
Caution! Risk of damage to health.
Operating materials can contain toxins that can severely damage the
eyes, mucous membranes and skin on contact.
• Do not inhale vapors.
• Avoid eye and skin contact.
• Always wear protective goggles and gloves when handling operating
materials.
• Consult a doctor immediately if operating materials get into your
eyes.
• In case of skin contact, wash skin immediately with soap and water.
• Do not eat or drink while working with vehicle fluids.
Safety

Vehicle fluids 4.11

23
4