Function Distributor; Display Test And Version Number - Schenck process Intecont Plus Belt Weigher Operating Manual

VBW

Function Distributor

The function distributor lets you call further functions,
or dialogs.
G
Call function distributor.
If no event is available, display shows
function selected last.
f
Start function.
N
Return to normal display and/or
abort function.
F u n c t i o n
D i s p l a y E v e n t s
TU
Scroll through function distributor
Display Events
Test Display
START/STOP Prefeeder Z
Service Values
Batch Number
Print Counter Readings
>0< Zero Set
START/STOP Keyboard Mode
Activate/Deactivate EasyServe
Programming
Calibrating Functions
Read Parameters
Enter Parameters
Load Default Parameters S
Print Parameters
Status Report
Tare
START/STOP Simulation
Check Weight
Imp/Belt Circuit
Set Time
Programming and calibrating functions lead to further
menus you can move through using cursor keys.
Control
BV-H2214 GB 8
B = If batching mode is selected, you can access
S = Calibrating functions protected by password.
E = If an event is available
Z
Moving through function distributor has no effect on
weighing functions.
Lets you check displays and signal lamps.
G
E
TU
B
f
S
S
Example:
S
VBW
20600-00
S
S
S
Technische
Redaktion PDE-RD
INTECONT PLUS
additional functions in main distributor.
Abort Batch
Deselect Batch
Batch Number
Print Batch
Make-up
Next = Belt Empty
Prompt is output after call of function.
= Iif activated via parameter

Display Test and Version Number

Call display test.
1. Display elements flash
rhythmically.
2. Version number is displayed for
apr. 3 s.
Test terminates automatically.
I N T E C O N T P L U S
VBW 20600-00 2482
: Belt Weigher
: Version number
Transmission to third parties and reproduction of
this documentation are not permitted. Schenck
Process GmbH reserves all rights of ownership
and copyrights.
0837