Configuring A Call Forward Key - Mitel 6920w User Manual

M C
ANAGING ALLS
all accounts. On the 6920, you can set all accounts to All On, All Off, or copy the configuration for the
account in focus to all other accounts using a CopytoAll softkey.
: If there is only one account configured on the phone, then the mode setting is ignored and the
NOTE
phone behaves as if the mode was set to Phone.
You can enable different Call Forward rules/modes independently (for example, you can set different
phone numbers for Busy, All, and NoAnswer modes and then turn them on/off individually).
The following table describes the key and Message Waiting Indicator (MWI) LEDs when you enable Call
Forward on the IP phone.
Key LED Behavior for All Modes (Left
Softkeys Only)
Call Forward key LED RED if any Call Forward
mode is enabled for the account in focus.
Call Forward key LED off if all Call Forward
modes are disabled for the account in focus.
: If you make changes to the configuration for Call Forward via the IP phone UI, you must refresh the
NOTE
Mitel Web UI screen to see the changes.
When Call Forward is set to either "Call Forward Busy" or "Call Forward No Answer" options, the MWI
LED on the SIP phone turns off. The LED turns on only when Call Forward is set to "Call Forward All".

Configuring a Call Forward Key

The following describes the process of configuring Call Forward on your phone. To configure a Call
Forward key, see
"Call Forward Key".
MWI LED Behavior for All Modes
MWI LED on if any Call Forward mode is enabled
for the account in focus.
MWI LED off if all Call Forward modes are
disabled for the account in focus.
DND C F
AND ALL ORWARD
169