Mitel 6920w User Manual page 54

C
USTOMIZING YOUR PHONE
Press the down navigation key to highlight Enter Time or Enter Date.
5.
Using the keys on the dialpad, change the time and date accordingly.When entering the time, use the
6.
AM/PM softkey to toggle between AM and PM.
Press the Save softkey to save your changes.
7.
Configuring Time and Date Settings Using the Mitel Web UI
Click on Basic Settings > Preferences > Time and Date Setting.
1.
In the Time Format field, select the time format you want to use on your phone. Valid values are:
2.
12h (12 hour format) (default)
–
24h (24 hour format)
–
: The time format you configure is applicable to the phone's Home screen as well as the
NOTE
Received Callers and Outgoing Redial Lists.
In the Date Format field, select the date format you want to use on your phone. Valid values are:
3.
WWW MMM DD (default)
–
DD-MMM-YY
–
YYYY-MM-DD
–
DD/MM/YYYY
–
DD/MM/YY
–
DD-MM-YY
–
MM/DD/YY
–
MMM DD
–
DD MMM YYYY
–
WWW DD MMM
–
DD MMM
–
DD.MM.YYYY
–
: The date format you configure is applicable to the phone's Home screen as well as the
NOTE
Received Callers and Outgoing Redial Lists.
In the NTP Time Servers field, enable the setting by checking the box or disable the setting by
4.
unchecking the box (default is enabled).
In the Time Server 1, Time Server 2, and Time Server 3fields, enter IP addresses or qualified
5.
domain names for the primary, secondary, and tertiary time servers.
T D
IME AND ATE
44