C
S
ONFIGURING
OFTKEYS
Speed Dial/Xfer Key Requirements and Functionality
The Speed Dial/Xfer key has the following capabilities:
Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speed Dial/Xfer key
•
causes the phone to go offhook and dial the predefined extension.
Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the Speed
•
Dial/Xfer key blind transfers the call to the predefined target.
If transferring a call fails, a message Transfer Failed displays, and you can reconnect the call (get the
call back) by pressing the line key again.
Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the Speed
•
Dial/Xfer key forwards the call to the predefined extension.
Configuring a Speed Dial/Xfer Key Using the Mitel Web UI
Click on Operation > Softkeys and XML.
1.
or
Click on Operation > Expansion Module <N>.
Softkeys
Select from Key 1 through Key 20 on the Top keys.
2.
or
Select from Key 1 through Key 18 on the Bottom keys.
In the Type field, select Speed Dial/Xfer.
3.
In the Label field, enter a label for the Speed Dial/Xfer key.
4.
In the Value field, enter the speed dial extension or the extension to transfer calls to (for example,
5.
3600).
In the Line field, select the line for which you want to use the key functionality.Valid values are:
6.
global
–
1 through 24
–
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
7.
Expansion Module Keys
Select from Key 1 through Key 84(M695).
8.
S
D
/X
PEED
IAL
FER
98