Configuring A Blf/List Key Using The Mitel Web Ui - Mitel 6920w User Manual

C S
ONFIGURING OFTKEYS
BLF/List State
Connected
Unknown
Not Monitored
For both BLF and BLF/List, the parameter "XXXkeyN ring splash" is applicable when the "..."keyN ring
splash" value is set to control the ring splash alert pattern.

Configuring a BLF/List Key Using the Mitel Web UI

If you set a key to use BLF/List, you must also enter a BLF List URI at Operation > Softkeys and XML >
Services. The BLF List URIis the name of the BLF list defined on the BroadSoft BroadWorks Busy Lamp
field page for your particular user. For example, sip:9@192.168.104.13. The value of the BLF List URI
parameter must match the list name configured. Otherwise, no values display on the 6920 screen and the
feature is disabled.
Click on Operation > Softkeys and XML.
1.
or
Click on Operation > Expansion Module <N>.
Softkeys
Select from Key 1 through Key 20 on the Top keys.
2.
In the Type field, select BLF/List (BroadSoft BroadWorks).
3.
LED Behavior
Solid Red
Off
Off
Softkey Icon
BLF/L K
IST EY
88