iC7 Series EtherNet/IP
Operating Guide
BUS
1420
rpm
Speed
WARN READY FAULT
OK
REM
LOC
OFF
RUN
Illustration 17: Fieldbus Indicator LED Location on Control Panel
For more information on control panels, refer to the application guides.
Illustration 18: Fieldbus Indicator LEDs on Modular Control Board
1
Fieldbus indicator LEDs (ST, X1, and X2)
•
The LED labeled ST shows the module status.
•
The LED labeled X1 shows the network status on Ethernet port X1.
•
The LED labeled X2 shows the network status on Ethernet port X2.
Table 21: Fieldbus Indicator LED Functions
LED label
Status
ST
Standby
Operational
Recoverable fault
32 | Danfoss A/S © 2023.09
BUS
1
LED pattern
Flashing green
Solid green
Flashing red
Description
Device needs commissioning.
Device is operational.
Device has detected a recoverable fault (MAR).
AQ456329199699en-000101 / 136R0335
Troubleshooting