Table of Contents
Advertisement
VMT6008
8 Software-/Driver-Installation
The device will be delivered with a pre-installed Windows / Linux operating system depending on what
the customer wants. The drivers required for this are already installed and the operating system will be
enabled by entering the licence information. Should an initial installation be required, please follow the
following steps. With a newer operating system like Windows XP, the network card and graphics card
will properly be recognised during the initial installation, so that only the touch screen driver and the soft
keyboard must be installed separately.
Note:
If the hard drive was formatted, the operating system can be reinstalled by using
one of the existing interfaces.
An external keyboard is required for installation.
Installation of the Operating System
The device does not have any integrated CD drive. The installation of the operating system can
therefore only be carried out by using the USB interface.
Procedure for installation
The boot drive in the system Bios must be switched to USB in order to boot
the device from the USB interface.
Restart the device and insert a Windows CD.
Install Windows and set up the basic data.
With devices including touch screens, the touch screen driver as well as the
soft keyboard should be installed in order to ensure their full functionality.
With Windows CE 6.0 or Windows XP embedded, a complete image can also be installed by using a
USB stick.
Pos : 37 /D atentec hni k/Softwar e / Trei ber Install ati on/Touc h Screen/Touc h Screen Installation für OPC 5112/5212/5315/551 5/5317/5319 / C PC 5006/OTC 5006/ VMT-Serie @ 0\mod_1159175108636_6.doc @ 665 @
© ads-tec GmbH • Heinrich-Hertz-Str.1• 72622 Nürtingen
31
Advertisement
Table of Contents
