VMT6008
Note:
If the case is connected with earth potential at the provided PE contact (e.g. by
connecting the PE contact with the device plug), the electrical insulation is no
longer given. This also applies if the device is installed by using a metal retainer
clip.
If you want to have the device electrically insulated from the power supply,
you have to use a method of installation that ensures appropriate insulation.
How to proceed if a PE system is used:
You must adhere to the following figure in order to ensure a correct installation of the
PE system.
Abb. 13:
© ads-tec GmbH • Heinrich-Hertz-Str.1• 72622 Nürtingen
23