Table of Contents
Advertisement
VMT6008
7 Drives
The storage medium is selected according to the customer requirements. The following options are
available for storage:
Flash SSD:
A Flash SSD with a storage capacity of at least 1GB is used. Its capacity depends on
the desired operating system and the additional programmes to be installed.
Note:
Recommendation for the choice of storage medium with a basic installation:
SSD Flash memory: Windows CE 6.0 / Windows XP embedded
Hard disk: Windows XP Professional
Pos : 35 /D atentec hni k/Laufwer ke/Exter ne Laufwerke/Exter ne Laufwer ke für OPC 5112 / 5115 / 5117 / IPC 1100 / CPC / PLC / OTC / ITC / VMT-Serie @ 0\mod_1158926656205_6.doc @ 563 @
Externe Laufwerke
By default, no drive for removable media (CD/floppy disk) is integrated in the device. Instead, the
system provides a USB interface, to which an external drive can be connected. In this case you'd have
to ensure that the used device is suitable for industrial environments.
Warning:
Connecting or disconnecting external drives during operation is not admissible,
since it cannot be excluded that the drive might be in use while connecting or
disconnecting it. Data loss might result in the event of non-compliance!
Pos : 36 /D atentec hni k/Softwar e / Trei ber Install ati on/Installati on des Betriebss ystems/Installation des Berti ebs s ystems für VMT 60xx @ 2 \mod_1263211380903_6.doc @ 6940 @
© ads-tec GmbH • Heinrich-Hertz-Str.1• 72622 Nürtingen
30
Advertisement
Table of Contents
